P Clips [1/2″ (12.7mm) Wide] Stainless

Description

One of the most popular clips in the market place is the humble ‘P’ clip. Most often they will be rubber lined using a 1.5mm thick E. P. D. M. rubber liner. The lined ‘P’ clip offers the user two advantages over it’s plain or unlined brother. Firstly, the rubber protects the hose from the steel or stainless steel of the ‘P’ clip. Secondly, the rubber provides an anti-vibration / noise reduction through its cushioning effect. This has been found to be an great advantage in the motor vehicle industry, where rubber lined ‘P’ clips are used extensively and to great effect.

The E. P. D. M. rubber liner offers the user of the ‘P’ clip excellent heat resistance. From a freezing -40oc right up to a burning 140oc E. P. D. M. also offers excellent abrasion, weather, aging and ozone resistance as well as UV stability.

1/2″ band width P clips sizes start from a tiny 3mm, however, because of the manufacturing process involved in producing the clip, there has so far been no upper limit as to what size the clip can go up to.

Available in zinc or stainless steel.

Fixing the clips can sometimes present a few problems, however, with the ½” band – width design, this is considerably reduced by introducing an elongated fixing hole on the front of the clip. This gives the user a far greater ability to locate the fixing screw/bolt than using 2 round holes or having the elongated hole on the back of the clip.For strength, all sizes and band – widths employ a strengthening ‘Joggle’ located on the back of the clip. This means that where the rubber liner meats flush with the clip, there is not just a simple ‘S’ curve in the metal, but the ‘Joggle’ or finger, breaks this step in two, allowing for greater strength.

We can also re-pierce these with 8mm holes.

ZPCS & PCS Range

Technical Specifications

MATERIAL SPEC:-

Stainless steel 301 grade

All P clips above 44mm diameter are not stamped with size.

Other sizes are available and all are available in the both zinc and stainless steel.

Code	Size [Closed Diam]	Holes to Suit	Width	Rubber Liner
PCS003	3mm	M6	12.7mm [1/2″]	EPDM
PCS004	4mm	M6	12.7mm [1/2″]	EPDM
PCS006	6mm	M6	12.7mm [1/2″]	EPDM
PCS008	8mm	M6	12.7mm [1/2″]	EPDM
PCS010	10mm	M6	12.7mm [1/2″]	EPDM
PCS013	13mm	M6	12.7mm [1/2″]	EPDM
PCS014	14mm	M6	12.7mm [1/2″]	EPDM
PCS016	16mm	M6	12.7mm [1/2″]	EPDM
PCS018	18mm	M6	12.7mm [1/2″]	EPDM
PCS019	19mm	M6	12.7mm [1/2″]	EPDM
PCS021	21mm	M6	12.7mm [1/2″]	EPDM
PCS022	22mm	M6	12.7mm [1/2″]	EPDM
PCS025	25mm	M6	12.7mm [1/2″]	EPDM
PCS027	27mm	M6	12.7mm [1/2″]	EPDM
PCS029	29mm	M6	12.7mm [1/2″]	EPDM
PCS030	30mm	M6	12.7mm [1/2″]	EPDM
PCS032	32mm	M6	12.7mm [1/2″]	EPDM
PCS035	35mm	M6	12.7mm [1/2″]	EPDM
PCS038	38mm	M6	12.7mm [1/2″]	EPDM
PCS040	40mm	M6	12.7mm [1/2″]	EPDM
PCS042	42mm	M6	12.7mm [1/2″]	EPDM
PCS044	44mm	M6	12.7mm [1/2″]	EPDM
PCS048	48mm	M6	12.7mm [1/2″]	EPDM
PCS050	50mm	M6	12.7mm [1/2″]	EPDM
PCS052	52mm	M6	12.7mm [1/2″]	EPDM
PCS055	55mm	M6	12.7mm [1/2″]	EPDM

Larger sizes can be made to order.

We can re-pierce with 8mm holes.

These can also be offered in 316 grade stainless steel. Made here in Birmingham, UK.