P Clips [1/2" (12.7mm) Wide] Stainless-0
P Clips [1/2" (12.7mm) Wide] Stainless-0

P Clips 1/2″ (12.7mm) Band width, 304 Stainless steel M8 fixing holes

One of the most popular clips in the market place is the ‘P’ clip.

These are available rubber lined using a 1.5mm thick EPDM rubber liner as standard. However, we can make these unlined.

Holes to suit M8.

304 Grade stainless steel

Enquire Now

Description

One of the most popular clips in the market place is the humble ‘P’ clip. Most often they will be rubber lined using a 1.5mm thick EPDM rubber liner. The lined ‘P’ clip offers the user two advantages over it’s plain or unlined brother. Firstly, the rubber protects the hose from the steel or stainless steel of the ‘P’ clip. Secondly, the rubber provides an anti-vibration / noise reduction through its cushioning effect. This has been found to be an great advantage in the motor vehicle industry, where rubber lined ‘P’ clips are used extensively and to great effect.

The EPDM rubber liner offers the user of the ‘P’ clip excellent heat resistance. From a freezing -40oc right up to a burning 140oc EPDM also offers excellent abrasion, weather, aging and ozone resistance as well as UV stability.

1/2″ band width P clips sizes start from a tiny 3mm, however, because of the manufacturing process involved in producing the clip, there has so far been no upper limit as to what size the clip can go up to.

Fixing the clips can sometimes present a few problems, however, with the ½” band width design, this is considerably reduced by introducing an elongated fixing hole on the front of the clip. This gives the user a far greater ability to locate the fixing screw/bolt than using 2 round holes or having the elongated hole on the back of the clip.For strength, all sizes and band – widths employ a strengthening ‘Joggle’ located on the back of the clip. This means that where the rubber liner meats flush with the clip, there is not just a simple ‘S’ curve in the metal, but the ‘Joggle’ or finger, breaks this step in two, allowing for greater strength.

We pierce these with 8.3mm holes.

PCS/8MMH Range

Technical Specifications

MATERIAL SPEC:-

Stainless steel 304 grade

Other sizes are available, we can make these p clips to your requirements.

Code Size [Closed Diam] Holes to Suit Width Rubber Liner
PCS003/8MMH 3mm M8 12.7mm [1/2″] EPDM
PCS004/8MMH 4mm M8 12.7mm [1/2″] EPDM
PCS006/8MMH 6mm M8 12.7mm [1/2″] EPDM
PCS008/8MMH 8mm M8 12.7mm [1/2″] EPDM
PCS010/8MMH 10mm M8 12.7mm [1/2″] EPDM
PCS013/8MMH 13mm M8 12.7mm [1/2″] EPDM
PCS014/8MMH 14mm M8 12.7mm [1/2″] EPDM
PCS016/8MMH 16mm M8 12.7mm [1/2″] EPDM
PCS018/8MMH 18mm M8 12.7mm [1/2″] EPDM
PCS019/8MMH 19mm M8 12.7mm [1/2″] EPDM
PCS021/8MMH 21mm M8 12.7mm [1/2″] EPDM
PCS022/8MMH 22mm M8 12.7mm [1/2″] EPDM
PCS025/8MMH 25mm M8 12.7mm [1/2″] EPDM
PCS027/8MMH 27mm M8 12.7mm [1/2″] EPDM
PCS029/8MMH 29mm M8 12.7mm [1/2″] EPDM
PCS030/8MMH 30mm M8 12.7mm [1/2″] EPDM
PCS032/8MMH 32mm M8 12.7mm [1/2″] EPDM
PCS035/8MMH 35mm M8 12.7mm [1/2″] EPDM
PCS038/8MMH 38mm M8 12.7mm [1/2″] EPDM
PCS040/8MMH 40mm M8 12.7mm [1/2″] EPDM
PCS042/8MMH 42mm M8 12.7mm [1/2″] EPDM
PCS044/8MMH 44mm M8 12.7mm [1/2″] EPDM
PCS048/8MMH 48mm M8 12.7mm [1/2″] EPDM
PCS050/8MMH 50mm M8 12.7mm [1/2″] EPDM
PCS052/8MMH 52mm M8 12.7mm [1/2″] EPDM
PCS055/8MMH 55mm M8 12.7mm [1/2″] EPDM

Larger sizes can be made to order.

These can also be offered in 316 grade stainless steel.

Made here in Birmingham, UK.

Related products