P Clips [1/2″ (12.7mm) Wide] Stainless

One of the most popular clips in the market place is the ‘P’ clip.

These are available rubber lined using a 1.5mm thick E. P. D. M. rubber liner.

Holes to suit M6.

Also available unlined

All sizes are available in both zinc and stainless steel

Enquire Now

Description

One of the most popular clips in the market place is the humble ‘P’ clip. Most often they will be rubber lined using a 1.5mm thick E. P. D. M. rubber liner. The lined ‘P’ clip offers the user two advantages over it’s plain or unlined brother. Firstly, the rubber protects the hose from the steel or stainless steel of the ‘P’ clip. Secondly, the rubber provides an anti-vibration / noise reduction through its cushioning effect. This has been found to be an great advantage in the motor vehicle industry, where rubber lined ‘P’ clips are used extensively and to great effect.

The E. P. D. M. rubber liner offers the user of the ‘P’ clip excellent heat resistance. From a freezing -40oc right up to a burning 140oc E. P. D. M. also offers excellent abrasion, weather, aging and ozone resistance as well as UV stability.

1/2″ band width P clips sizes start from a tiny 3mm, however, because of the manufacturing process involved in producing the clip, there has so far been no upper limit as to what size the clip can go up to.

Available in zinc or stainless steel.

Fixing the clips can sometimes present a few problems, however, with the ½” band – width design, this is considerably reduced by introducing an elongated fixing hole on the front of the clip. This gives the user a far greater ability to locate the fixing screw/bolt than using 2 round holes or having the elongated hole on the back of the clip.For strength, all sizes and band – widths employ a strengthening ‘Joggle’ located on the back of the clip. This means that where the rubber liner meats flush with the clip, there is not just a simple ‘S’ curve in the metal, but the ‘Joggle’ or finger, breaks this step in two, allowing for greater strength.

We can also re-pierce these with 8mm holes.

ZPCS & PCS Range

Technical Specifications

MATERIAL SPEC:-

Stainless steel 301 grade

All P clips above 44mm diameter are not stamped with size.

Other sizes are available and all are available in the both zinc and stainless steel.

Code Size [Closed Diam] Holes to Suit Width Rubber Liner
PCS003 3mm M6 12.7mm [1/2″] EPDM
PCS004 4mm M6 12.7mm [1/2″] EPDM
PCS006 6mm M6 12.7mm [1/2″] EPDM
PCS008 8mm M6 12.7mm [1/2″] EPDM
PCS010 10mm M6 12.7mm [1/2″] EPDM
PCS013 13mm M6 12.7mm [1/2″] EPDM
PCS014 14mm M6 12.7mm [1/2″] EPDM
PCS016 16mm M6 12.7mm [1/2″] EPDM
PCS018 18mm M6 12.7mm [1/2″] EPDM
PCS019 19mm M6 12.7mm [1/2″] EPDM
PCS021 21mm M6 12.7mm [1/2″] EPDM
PCS022 22mm M6 12.7mm [1/2″] EPDM
PCS025 25mm M6 12.7mm [1/2″] EPDM
PCS027 27mm M6 12.7mm [1/2″] EPDM
PCS029 29mm M6 12.7mm [1/2″] EPDM
PCS030 30mm M6 12.7mm [1/2″] EPDM
PCS032 32mm M6 12.7mm [1/2″] EPDM
PCS035 35mm M6 12.7mm [1/2″] EPDM
PCS038 38mm M6 12.7mm [1/2″] EPDM
PCS040 40mm M6 12.7mm [1/2″] EPDM
PCS042 42mm M6 12.7mm [1/2″] EPDM
PCS044 44mm M6 12.7mm [1/2″] EPDM
PCS048 48mm M6 12.7mm [1/2″] EPDM
PCS050 50mm M6 12.7mm [1/2″] EPDM
PCS052 52mm M6 12.7mm [1/2″] EPDM
PCS055 55mm M6 12.7mm [1/2″] EPDM

Larger sizes can be made to order.

We can re-pierce with 8mm holes.

These can also be offered in 316 grade stainless steel. Made here in Birmingham, UK.